Ningbo YINGBOTE Trading Co.,Ltd
Height adjustable desks are getting more and more popular. With LegaDrive Systems you can easily adjust your desired table height by a simple press of a button. This supports the comfortable and healthy change between standing and sitting at a table during work, preventing from long-term backache or even herniated disks.LegaDrive Systems can be used for desks and tables in many shapes and environments, such as desks and conference tables in offices and also in residential applications .In this video Laura Schäfers and Dominic Beckendorf present the installation of height adjustable desks with LegaDrive Systems. The basic LegaDrive set includes all required system components for one height adjustable desk – except for the wooden table top: Two LegaDrive lifting columns, the frame module “Basic” with two desk top supports, connector profiles, foot extensions as well as installation material. The electronic module consists of the control unit, the handset and the power connection cable with EU plug. You will find power connection cables with different plugs in the product range of Hettich. Screw the LegaDrive lifting columns to the foot extensions first. The cable will later be connected to the control and must be installed at a 90 degree angle to the foot extensions. Then screw both of the desk top supports to the connector profiles using the screws included in the set. The connector profiles can be mounted in a grid of 50 mm. This ensures a great flexibility: the table width can be varied between 1.200 until 2.000 mm in 50 mm steps. The table depth is flexible between 800 and 1.000 mm. Connect the desk support frame to the columns next, then mount desk top. There is no need for pre-drilling the desk top, simply use the included screws.The control unit “Compact e3″ operates all functions of the table. Please pay attention to the correct sequence of wiring! It is important to start wiring with the lifting columns and hand button. Cable ties are recommended for a secure attachment of all cables below the table desk. You can now connect the connection cable to the power supply. The clicking of the control unit signals its functionality. As an initial operation, press the hand button ‘down’ and hold it for 3 seconds. A short movement shows the availability of the system. Now the table is ready for daily use and can be adjusted to any height from 650 mm to 1.330 mm. This way, even very small and very tall people will find an ergonomically correct position while sitting or standing. Check the LegaDrive videos for tips and tricks on height adjustment and programming of stopping positions: addition to the basic table, Hettich also offers LegaDrive systems for angel desks with 90 degrees and 135 degrees: installation process is the same. If you build the table in according to Hettich specification, you will take advantage of the GS certification of the system. Detailed mounting and operation instructions are available for download from the media center.This system has just been introduced to the marked. Please contact your Hettich contact person or Hettich distributor for latest information on availability in your country.